If you’ve ever reached for a soda can, a window frame that keeps your home insulated, or a heat sink that cools a smartphone, you’ve held an aluminium section. But few people stop to wonder how that lightweight, durable, perfectly shaped piece of metal gets from a raw ingot to a functional part. As an aluminium section supplier who’s walked the factory floors and stood by presses that hum with precision 12 hours a day, I can tell you it’s not just a process—it’s a balance of metallurgy, craft, and attention to every tiny detail that makes the final product work. Let me walk you through the step-by-step process we use to extrude aluminium sections, the mistakes we avoid, and the care that goes into every extrusion that leaves our warehouse. Aluminium Section

Step 1: Preparing the Raw Material – Ingots and Billet Homogenization
It all starts with 99.7% pure aluminium, usually sourced from bauxite ore through the Bayer and Hall-Héroult processes. For extrusion, that pure aluminium is melted into large, cylindrical ingots, then cut into shorter blocks called billets. But raw billets are far from ready to be shaped. Their internal structure is uneven—small, hard clusters of alloying elements (like magnesium, silicon, or copper, which we add to boost strength) are scattered unevenly, and the grain structure is rough. If we tried to extrude a billet straight from the cast, it would crack, or the final section would be inconsistent. That’s why we start with homogenization: we heat the billets to around 580°C (1,075°F) in large, controlled furnaces for 8 to 12 hours. This slow, even heating dissolves those uneven alloy clusters and evens out the grain structure, making the metal soft, malleable, and predictable. It’s a step that many smaller suppliers skip to save time, but we’ve learned it’s the foundation of a high-quality extrusion. After homogenization, we let the billets cool to a manageable temperature—around 450°C (840°F)—right before they go into the press.
Step 2: Tooling Design and Fabrication – The Die That Makes the Shape
The next, most critical step is designing the die, the hardened steel block that will force the aluminium to take its exact shape. Every aluminium section we make—from a simple rectangular bar to a complex window frame with multiple chambers—needs a custom die. Our engineering team works closely with clients to turn their sketches or CAD files into a die that’s both functional and cost-effective. For example, a heat sink for an LED light needs thin, parallel fins to maximize air flow, but too thin and the fins will break during extrusion. We run simulations to test the flow of aluminium through the die’s channels, making sure there are no weak spots where metal would pool or rush ahead unevenly, which would cause warping.
Once the design is finalized, we fabricate the die from H13 tool steel, a special grade that can withstand repeated exposure to high heat and pressure without wearing out. The die is machined with intricate precision—even a slight irregularity in a 0.1mm-wide fin can ruin the entire section. We use CNC milling and EDM (electrical discharge machining) to carve the die’s profile, then polish the surface to reduce friction. It takes anywhere from a few days to a week to make a single die, and we keep dozens in stock for common profiles, while custom dies are part of what we offer for unique client projects. I’ve seen dies crack mid-extrusion, leading to hundreds of kilos of wasted metal, so we always test new dies on a small billet first before running a full production batch.
Step 3: The Extrusion Press – Forcing Metal Through the Die
The core of the process is the extrusion press, a massive machine that can weigh hundreds of tons. Most of our presses are direct extrusion presses, which are the standard for aluminium sections. Here’s how it works: first, we load the preheated billet into a cylindrical chamber called a container. A heavy, steel ram (weighing up to 1,000 tons, depending on the press) pushes the billet forward at a controlled speed. The metal is forced through the die’s openings, which have the exact shape of the section we want. As it exits the die, the aluminium is still hot and soft, so it emerges in a continuous, long profile that matches the die’s shape.
The speed of the ram is everything. If we push too fast, the aluminium doesn’t have time to flow evenly through the die, leading to uneven thickness, surface defects, or cracks. If we push too slow, the metal cools too much mid-extrusion, hardens, and can’t form the shape. We adjust the speed based on the alloy we’re using: soft alloys like 6060 extrude faster than stronger alloys like 6061, which is used for structural parts. The pressure inside the chamber is intense—up to 5,000 psi in some presses—so the entire machine has to be rigid and well-maintained. I’ve been in the press room when a ram seal failed, causing hot aluminium to leak; it’s always a mess, but that’s why we do daily checks on every part of the press.
Step 4: Cooling and Straightening – Setting the Shape
As the extruded section exits the die, it’s hot enough to burn skin—usually around 400°C (750°F). If we just let it cool on its own, it will warp, twist, or bend, especially for thin, complex profiles. That’s why we immediately quench the section: we pull it into a spray chamber where cool water or forced air brings the temperature down rapidly to around 100°C (212°F). Quenching locks in the metal’s strength and sets the shape, so it doesn’t deform later.
After quenching, the section is still a bit bent from the extrusion process, so we straighten it while it’s still warm and flexible. We use a straightening press, which applies controlled pressure along the length of the profile, or stretch straightening, where we pull the section to a small percentage of its maximum length to eliminate any bowing. For sections that need extra precision, like those used in aerospace or medical equipment, we use precision straightening beds with laser alignment to ensure the profile is straight within a fraction of a millimeter. It’s a tedious step, but it’s the difference between a section that fits perfectly into a window frame and one that’s useless.
Step 5: Cutting and Aging – Finalizing the Strength
Once the section is straight and cool, we cut it to the required lengths using a cold saw or a band saw. The exact length depends on the client’s needs—we can cut anything from 1-meter long sample sections to 6-meter long full production profiles. Before the cut sections go to finishing, we do aging, a heat treatment step that gives the aluminium its final strength. The most common alloy for general aluminium sections is 6061, which gains strength through precipitation hardening: we heat the cut sections to around 175°C (350°F) for 6 to 8 hours. During this time, tiny particles of magnesium and silicon form within the aluminium grain structure, which act as barriers to stop dislocations (the shifts that cause metal to bend) from moving. This is what makes 6061 strong enough for window frames, railings, and even small structural beams. Skipping aging would leave the section soft and prone to bending, so we never rush this step.
Step 6: Finishing Processes – Surface Treatment for Durability and Aesthetics
Most aluminium sections don’t leave the factory raw—we offer a range of finishing options to meet client needs, whether they’re for interior trim, outdoor building facades, or electronic parts. The most common finishes are:
- Anodizing: This is an electrochemical process that thickens the natural oxide layer on the aluminium surface, making it more resistant to scratches and corrosion. We can anodize in clear, bronze, black, or even custom colors, and the finish has a durable, matte or semi-gloss look that’s perfect for window frames and architectural parts.
- Powder Coating: We apply a dry powder paint electrostatically to the surface, then cure it in an oven. This creates a thick, scratch-resistant finish that comes in thousands of colors, and it’s more environmentally friendly than liquid paint. It’s popular for outdoor railings and furniture because it withstands UV rays and rain.
- Mill Finish: For industrial parts that don’t need aesthetic treatment, we leave the section with its natural, slightly rough metallic surface, which is strong and cost-effective.
Before finishing, we do a thorough inspection of every section to remove any surface defects—like small scratches or die lines—using wire brushes or abrasive pads. Even the tiniest defect can ruin a finish, so our quality control team checks every piece before it moves to finishing.
Step 7: Quality Control – Ensuring Every Section Meets Standards
We don’t ship any aluminium section without rigorous quality checks. Our in-house team tests for:
- Dimensional Accuracy: We use laser calipers and coordinate measuring machines (CMM) to make sure the thickness, width, and shape match the client’s specifications within 0.1mm tolerance.
- Mechanical Strength: We test small sample pieces for tensile strength, yield strength, and hardness to make sure they meet industry standards (like ASTM B221 for aluminium extrusions).
- Surface Finish: We inspect for scratches, discoloration, or defects that would cause the section to fail in use.
We also do batch testing—every 500 sections, we pull one to run through all the tests. In 10 years of being a supplier, we’ve only had one batch fail inspection, and that was because a homogenization furnace malfunctioned; we corrected the furnace settings, recalled the batch, and updated our daily checks to make sure it never happened again. That commitment to quality is why our clients come back, year after year.
What Makes Our Extrusions Different?

A lot of aluminium section suppliers cut corners—skipping homogenization, using cheaper dies, or rushing aging to meet delivery times. But for us, extrusion is more than a manufacturing process; it’s a craft. We work closely with each client, from small businesses needing custom window sections to large construction firms needing structural beams, to adjust every step to their needs. For example, if a client needs a lightweight section for a food truck, we use a soft, easy-to-extrude alloy with a smooth mill finish. If a client needs a section for a bridge, we use a high-strength 6082 alloy and anodize it for maximum corrosion resistance.
Aluminum Profiles If you’re looking for reliable, high-quality aluminium sections for your next project—whether it’s a home renovation, a construction build, or a new electronic device—we can work with you to design, extrude, and finish exactly what you need. We offer custom profiles, bulk orders, and fast turnaround times for both standard and custom parts. To learn more about our extrusion capabilities, get a quote, or discuss your project, feel free to reach out to our team to start the conversation.
References
- Campbell, J. (2014). Extrusion of Aluminium Alloys. Butterworth-Heinemann.
- ASM International. (2005). Metallurgy of Aluminium Extrusion. ASM Handbook, Volume 14A: Metalworking: Bulk Forming.
- Davis, J. R. (Ed.). (2001). Aluminium and Alloys. ASM International.
- European Aluminium Association. (2019). Guide to Aluminium Extrusion for Architectural Applications.
Hefei Nuozun Aluminum Industry Co., Ltd.
As one of the most professional aluminium section manufacturers and suppliers in China, we also support customized service. Please feel free to wholesale bulk premium aluminium section made in China here from our factory. Welcome to contact us for pricelist.
Address: Nuozun Aluminum Industry, Sunwubian, Shitang, Heshun, Lishui Town, Nanhai District, Foshan City, Guangdong Province
E-mail: nuozunaluminum@126.com
WebSite: https://www.cnnuozun.com/