Posted in

How to make a fire pit cover?

As a fire pit supplier who’s spent nearly a decade helping homeowners and small outdoor businesses keep their fire pits in top shape, I’ll be the first to admit I’ve seen way too many fire pit covers that are either poorly sized, made of the wrong material, or fall apart after just two seasons. I’ve also seen customers skip the cover entirely—only to end up with rusted metal grates, caked-on ash that’s impossible to scrub off come next fire season, or water pooling in the fire pit bowl that leads to expensive corrosion. Making your own custom fire pit cover isn’t just a weekend DIY project; it’s a science, and as someone who’s sourced hundreds of thousands of fire pit components, I’ve learned the ins and outs that make a cover actually work (not just look like it does). Fire Pit

First, let’s start with why a generic store-bought cover is rarely the right fit. Big box stores sell one-size-fits-all covers that either hang too loose, letting wind lift them up and dump water inside, or are too tight to fit over any accessories you might have—like a poker, a grate lifter, or even a small tabletop grate you use for roasting marshmallows. I had a customer last year who bought a cheap Amazon cover for his 30-inch cast iron fire pit, and by the end of winter, the wind had ripped two holes in it, leaving his fire pit bowl so full of water that the cast iron developed a deep rust stain he couldn’t sand off. That’s the kind of avoidable hassle we’re here to fix. When you make a cover tailored to your exact fire pit, you eliminate those problems—and you end up with something that lasts way longer than a generic option.

Before you grab your tape measure and fabric, there are two critical rules to follow, and they’re rooted in basic physics and material science. First, the cover needs to protect your fire pit from two main threats: moisture and UV damage. Water is the enemy of metal fire pits (rust forms when water reacts with iron and oxygen, a chemical reaction called oxidation), and UV rays break down the fibers in synthetic fabrics, making them brittle and prone to tearing after a few months in direct sunlight. Second, the cover needs to stay secure in wind. I’ve seen countless covers blown across yards like kites—once I even found one in a neighbor’s tree—so wind resistance isn’t a nice-to-have; it’s a must.

Now, let’s get into the practical steps. First, you need to measure your fire pit correctly. Skip the guesswork here—grab a steel tape measure (not a fabric one, which can stretch) and take three key measurements. First, the diameter of your fire pit bowl: measure across the widest part of the top of the bowl, not the outer edge of the rim. If your fire pit has a square or rectangular bowl, measure the length and width of the top opening, not the sides. Second, the height of your fire pit: measure from the ground (or whatever surface it’s sitting on) to the very top of the rim. Most fire pits are 12 to 18 inches tall, but custom models can vary, so don’t assume. Third, if you have any protrusions—like side handles, a vent on the side, or a built-in ring for a grill grate—measure how far out they stick from the rim. You’ll need to add extra space to your cover pattern to clear these, otherwise you’ll end up with a cover that won’t fit down all the way.

Next, choose your material, and this is where the science comes in. As a fire pit supplier, I’ve tested five common cover materials, and each has pros and cons that make them better or worse for different use cases. Let’s break them down:

  1. Heavy-Duty Polyester (600D or Higher): This is the most popular DIY material for good reason. The “D” stands for denier, a unit that measures fiber thickness—600D polyester is thick, tear-resistant, and has a PVC coating that makes it waterproof. It also resists UV damage better than lower denier polyester, with some UV-treated 600D polyester lasting up to three years outdoors. The downside is it’s not fully waterproof; it’s water-resistant, meaning it will repel rain but might let in moisture over time if left sitting in heavy, constant rain. I recommend this material for most casual users whose fire pits are under a patio or slightly sheltered from extreme weather.

  2. PVC-Coated Vinyl: If your fire pit is in full sun and exposed to heavy rain, vinyl is a better bet. It’s 100% waterproof, doesn’t absorb moisture at all, and resists UV rays better than polyester. The downside is it’s stiff, which can make it harder to cut and sew, and it can crack if it gets very cold (below 32 degrees Fahrenheit). It’s also heavier, which helps it stay secure in wind. I’ve used vinyl covers for my own commercial fire pits, and they’ve held up for four years with no rust under them.

  3. Stainless Steel Mesh: For people who use their fire pit year-round and hate fabric covers, stainless steel mesh is a game-changer. Wait, mesh? Let me explain: a lot of people think mesh would let water in, but no—if you use fine-grade stainless steel mesh (18-gauge or thicker) with a solid stainless steel rim, the mesh lets air circulate so no condensation builds up inside, which prevents rust from forming on the inside of the cover as well as the fire pit. It’s also fire-resistant, so if a stray ember lands on it, it won’t burn through. The only downside is it’s more expensive, and it’s heavier, so you’ll need to add a latch or weight to keep it from sliding off. I’ve installed custom mesh covers for several of my commercial clients at outdoor restaurants, and they love that they don’t have to replace fabric covers every two years.

  4. Canvas (Heavy-Duty): Cotton canvas is breathable, so condensation won’t build up inside, which is good for preventing rust, but it’s not waterproof. If you treat it with a fabric waterproofing spray (I recommend a silicone-based spray, not a wax-based one, which can leave stains), it will repel light rain, but it will get saturated in heavy downpours. It also breaks down quickly in UV light, so it’s best for fire pits that are only used seasonally and stored under cover during the off-season.

  5. Aluminum Foil (Temporary Fix): I only mention this as a last-minute emergency fix—aluminum foil is fire-resistant, but it tears easily, doesn’t stay secure, and will not protect your fire pit from rain or wind. Don’t waste your time with this.

Once you’ve picked your material, it’s time to cut and sew the cover. Let’s focus on the most popular option: a polyester or vinyl round cover for a round fire pit (we’ll cover square/rectangle later). First, add 2 inches to your fire pit’s diameter measurement—this extra space lets the cover hang over the rim without being too tight, and gives you room to add a hem for elastic or a drawstring. For example, if your fire pit is 30 inches in diameter, your cover’s top circle will be 32 inches across. Next, calculate the height: add 2 inches to your fire pit’s height measurement to account for the bottom hem. So if your fire pit is 15 inches tall, your cover’s height will be 17 inches.

Cutting the fabric: Lay your fabric out on a flat surface (a garage floor or table works) and use a washable fabric marker to draw your pattern. For a round cover, first draw a straight line across the middle of your fabric, then mark half the diameter (so 16 inches for our 32-inch cover example) on either side of that line to make the top circle. Then, draw two straight lines from the edge of the top circle down to the bottom edge, making sure the total height is 17 inches. This is a cone shape, which will fit snugly over your fire pit, with the bottom open to pull tight around the rim.

If your fire pit is square, the pattern is a bit different. For a square fire pit, measure the length and width of the top opening, add 2 inches to each for overhang, then cut a square of fabric that size. Then, cut a square out of each corner of the top, equal to the height of your cover minus 2 inches. Fold the edges of these cut corners up and sew them to make the sides of the cover, which will fit over the square rim.

Sewing tips: Use a heavy-duty sewing machine—regular home machines can’t handle thick vinyl or 600D polyester, and you’ll break needles. If you don’t have a heavy-duty machine, many local fabric shops offer sewing services for a small fee (usually $20-$30 for a standard cover). For the bottom hem, sew a 1-inch fold all around the open edge of the cover, leaving a 2-inch gap to thread a drawstring or elastic. A 1/4-inch cotton or polyester drawstring works best, or you can use shock cord, which stretches and is more secure in wind. For extra wind resistance, add two small D-rings to opposite sides of the cover’s rim, then use a bungee cord to latch the cover to the fire pit’s side handles.

If you’re using stainless steel mesh, the process is a bit different because you can’t sew mesh easily. You’ll need to use pop rivets and a metal rim (available at most hardware stores) to assemble it. Cut the mesh to your pattern, lay it over the metal rim, then rivet it in place, adding a handle on top and a latch on the side to keep it closed. This type of cover is perfect for anyone who wants a long-lasting, low-maintenance option.

Wait, a common mistake I see DIYers make is not accounting for ash. If you leave ash in your fire pit, it can retain moisture and cause rust even under a cover, so make sure you let all ashes cool completely for at least 48 hours (never cover a fire pit while ashes are still hot—this is a fire hazard, full stop) and wipe out any excess loose ash before putting the cover on. Another mistake: not weighing the cover down if you live in a very windy area. You can add small sandbags to the bottom hem, or use a few heavy rocks, but make sure the rocks don’t scratch the fire pit’s rim.

If you’re not the DIY type, that’s totally fine too—many of my customers order custom covers directly from us, tailored to their exact fire pit size and material preference. We work with both residential customers and small outdoor business owners, like campgrounds and patio restaurants, who need durable covers that hold up to daily use. Whether you make your own or order a custom one, investing in a proper fire pit cover will save you hundreds of dollars in repair and replacement costs over the years.

At the end of the day, a fire pit is more than just a place to build a fire—it’s where you gather with friends and family, make s’mores, and create memories. Protecting it with a well-made cover means you won’t have to spend every spring scrubbing rust off your fire pit or replacing a tattered cover. If you’re ready to make a cover, or have questions about sizing, materials, or even custom options for your fire pit, we’re here to help. Reach out to our team to start a conversation about what will work best for your outdoor space, no matter what type of fire pit you own.

Electric Grills References:

  1. American Society for Testing and Materials. (2021). Standard Practice for Protection of Outdoor Metal Structures from Atmospheric Corrosion. ASTM International.
  2. Outdoor Power Equipment Institute. (2022). Guide to Fire Pit Maintenance and Seasonal Protection. OPEI.
  3. Textile Institute. (2020). Denier and Fiber Denotation for Outdoor Textile Products. The Textile Institute.
  4. National Fire Protection Association. (2023). NFPA 1: Fire Code, Section 12.3.5 (Fire Pit Safety and Protection).

Huzhou Blue Carp Co., Ltd.
With abundant experience, we are one of the most professional fire pit manufacturers in China. Please rest assured to wholesale cheap fire pit for sale here from our factory. If you have any enquiry about custom service, please feel free to email us.
Address: Longxi Subdistrict, Huzhou South Taihu New Area, Huzhou City, Zhejiang Province, China
E-mail: tonycheung@bluecarpbbq.com
WebSite: https://www.bluecarpbbq.com/