If you’ve ever wondered how a membrane vapor recovery system works, it’s easy to fixate on the thin, specialized membranes that separate valuable hydrocarbons from air, but the components that hold those membranes in place, seal gaps, and withstand constant exposure to harsh vapors are just as critical. As a supplier of membrane vapor recovery systems, I’ve spent years helping operators across oil and gas, petrochemical, and logistics facilities choose the right materials for every part of these systems—and over that time, I’ve learned that there’s no one-size-fits-all approach. The material you pick for a flange, a seal, or a housing isn’t just a technical detail: it’s what keeps your system running reliably for 10+ years without unplanned downtime or costly leaks. Membrane Vapor Recovery Systems

Let’s break down each key component and the materials that make them work, starting with the core of the system: the membrane itself. Membranes are the active element that does the actual separation, and almost all modern vapor recovery membranes are made from polymers—specifically, high-performance glassy polymers like polyimide, polyetherimide (PEI), and cellulose acetate. These materials work because their molecular structure has tiny, uniform pores or free volume that lets small, light molecules (like methane, propane, or other volatile organic compounds, or VOCs) pass through faster than larger, heavier air molecules. For example, polyimide membranes have excellent chemical resistance to common hydrocarbons, so they don’t break down when exposed to high concentrations of gasoline or natural gas vapors during extended operation. In some cases, we also use composite membranes, where a thin selective layer of a glassy polymer is coated onto a porous support made of a cheaper, more robust polymer like polyethersulfone (PES). The support adds mechanical strength to prevent the thin selective layer from tearing or warping under the pressure differences that drive vapor separation, which is especially important for large-scale systems that process thousands of cubic meters of vapor per day.
Next, consider the membrane module housing—the rigid shell that holds the membrane bundles in place, keeps vapors contained, and withstands the pressure of the separation process. Here, the choice of material depends entirely on the operating environment. For most standard atmospheric or low-pressure applications, we use carbon steel lined with a chemical-resistant epoxy or polyurethane. Carbon steel is affordable, strong, and easy to fabricate into the large cylindrical or rectangular shapes needed for membrane modules, and the liner protects the steel from corrosion by acidic vapors or residual chemicals that can seep through seals over time. But for more harsh environments—like offshore platforms where salt spray is constant, or refineries with high levels of hydrogen sulfide (H₂S) that can eat away at unprotected steel—we switch to stainless steel, usually 316L grade. 316L stainless steel has a higher molybdenum content than standard 304 stainless steel, which gives it superior resistance to both salt corrosion and H₂S-induced stress cracking. For smaller, skid-mounted systems that need to be lightweight and portable, we also use fiberglass-reinforced plastic (FRP). FRP is corrosion-resistant, non-conductive, and much lighter than steel, making it ideal for temporary vapor recovery setups or locations near sensitive electrical equipment where conductivity is a risk.
Seals and gaskets are another often-overlooked component, and their material selection is make-or-break for preventing leaks. A single faulty seal can cause 100+ liters of VOCs to escape per day, which not only wastes valuable product but also violates environmental regulations in most regions. For standard applications with moderate temperatures and pressures, we use ethylene propylene diene monomer (EPDM) rubber. EPDM is affordable, flexible, and resistant to many common hydrocarbons, so it works well for general-purpose gaskets. But for high-temperature operations (like systems processing hot vapor from a refinery distillation unit) or exposure to aromatic hydrocarbons like benzene, EPDM falls short. In those cases, we turn to fluoropolymers like Viton (fluoroelastomer) or PTFE (polytetrafluoroethylene, commonly called Teflon). Viton has excellent resistance to high temperatures and aromatic compounds, so it’s the go-to for gaskets in mid- to high-temperature modules. PTFE, meanwhile, is almost completely inert, so it’s used for seals in systems that process highly aggressive chemicals or cryogenic vapors—though it’s less flexible than other rubbers, so we only use it where its chemical resistance is absolutely necessary.
Flanges and piping, which connect membrane modules to the rest of the vapor recovery system (like compressors, condensers, or storage tanks), also require careful material selection. For standard pressure applications, carbon steel flanges are common, but we always pair them with corrosion-resistant linings to match the module housings. For offshore or coastal applications, stainless steel flanges (316L, again) are preferred to avoid rust, which can flake off and enter the system, damaging membranes or blocking pipes. In some cases, we also use high-alloy materials like Hastelloy for piping in systems that process very high concentrations of H₂S or other corrosive gases—though Hastelloy is significantly more expensive, so we only recommend it when other materials have been proven to fail in similar environments.
Valves, which control the flow of vapors through the system, have their own unique material needs. The valve body is often made from cast iron or carbon steel for standard use, but the internal parts (like the stem, disc, and seals) need to be compatible with the vapors being processed. For example, if a valve handles gasoline vapors, the internal seals should be Viton or PTFE to prevent swelling or degradation, while the stem might be 316L stainless steel to resist corrosion from condensate that forms inside the valve over time. For valves in low-pressure, non-corrosive lines, brass is a common, cost-effective choice—but brass can react with certain chemicals (like ammonia) in high concentrations, so it’s not suitable for all applications.
Of course, no discussion of materials would be complete without talking about long-term performance. Over the years, we’ve seen firsthand how the wrong material choice can lead to problems. A few years ago, we worked with a small oil terminal that installed a vapor recovery system with EPDM gaskets in a region with high summer temperatures. Within 18 months, the gaskets cracked, leading to a leak that violated local environmental rules and required a full system shutdown to replace them. The terminal switched to Viton gaskets after that, and they haven’t had a gasket issue in four years. On the flip side, over-specifying materials can drive up costs unnecessarily. For a pipeline that only processes low-pressure, non-corrosive natural gas vapors, using 316L stainless steel flanges would add thousands of dollars to the system’s cost without providing any real benefit.
As a membrane vapor recovery system supplier, our job isn’t just to deliver a turnkey system—it’s to help clients choose materials that balance performance, cost, and long-term reliability. That means evaluating not just the current operating conditions, but also potential future changes: will the facility expand its vapor processing capacity? Will it start handling new types of chemicals in the next few years? All of these factors influence which materials will work best.

If you’re in the market for a membrane vapor recovery system, or if your current system is experiencing leaks, downtime, or performance issues, we’re here to help. Our team of engineers can assess your facility’s specific needs, walk you through the pros and cons of every material option, and design a system that meets your operational and budget requirements. Don’t let material choices derail your vapor recovery goals—reach out to us to start a conversation about your project.
Chemical Plant Vapor Recovery Equipment References:
Baker, R. W. (2012). Membrane Technology and Applications. John Wiley & Sons.
Koros, W. J., & Mahajan, R. (2000). Pushing the limits on possibilities for large scale gas separation: which strategies? Journal of Membrane Science, 175(2), 181-196.
Perry, R. H., & Green, D. W. (2008). Perry’s Chemical Engineers’ Handbook (8th ed.). McGraw-Hill.
Smith, B. L., & Vane, L. M. (2005). Materials compatibility for membrane vapor recovery systems. Industrial & Engineering Chemistry Research, 44(12), 4247-4256.
Shandong Kosman Environmental Technology Co., Ltd.
Shandong Kosman Environmental Technology Co., Ltd. is one of the leading manufacturers and suppliers of membrane separation vapor recovery unit in China, featured by quality products and low price. Please rest assured to buy advanced equipment made in China here and get pricelist from our factory. Customized orders are welcome.
Address: No. 5, single-story steel frame structure, Electromechanical Industrial Park, Chengwu County Economic Development Zone, Heze City, Shandong Province
E-mail: keshiman2021@126.com
WebSite: https://www.kosman-vrufactory.com/