As a supplier of RTD sensors, I get asked all the time by both new engineers and long-time industry partners: “What are the different types of RTD sensors, and which one should I use for my application?” It’s a great question—because choosing the right RTD isn’t just about picking a product off a shelf; it’s about matching the sensor type to your specific temperature range, environment, and accuracy needs. After over a decade working directly with manufacturers, integrators, and end-users, I’ve seen first-hand how picking the wrong RTD can throw off entire process lines, ruin batch products, or cost thousands in downtime. Today, I want to break down the main types of RTD sensors, their unique strengths, and the scenarios where each shines—so you can make a more confident choice, and if you’re ready to source reliable RTDs, we’re here to help. RTD Sensor

First, let’s start with a quick refresher for anyone new to RTDs, because their basics set the foundation for why types matter. RTD stands for Resistance Temperature Detector, a sensor built on the principle that pure metals’ electrical resistance changes predictably and linearly with temperature. Unlike thermocouples, which generate voltage, RTDs measure resistance directly, making them far more accurate and stable for most mid-to-high temperature applications. The most common base metal for standard RTDs is platinum, thanks to its consistent resistance curve, resistance to corrosion, and ability to work across a wide temperature range (-200°C to 850°C, roughly). That consistency is why 90% of RTDs produced fall into platinum-based categories—but there are other metals and configurations that serve niche needs.
The first and most widely recognized type is Thin-Film RTDs. If you’ve ever seen a small, flat temperature sensor taped to a metal pipe or embedded in a plastic molding, there’s a good chance it’s a thin-film RTD. Here’s how they’re made: a thin layer of platinum (just a few micrometers thick) is deposited onto a ceramic or glass substrate, then etched into a precise resistance pattern, and sealed with a protective glass or polymer coating. As an RTD supplier, we lean on thin-film RTDs for many standard applications because of their biggest advantage: cost efficiency. They’re cheaper to manufacture than other RTD types, which makes them ideal for high-volume uses, like HVAC systems, consumer appliances, or even general process monitoring where accuracy doesn’t need to be ultra-high. But thin-film RTDs do have trade-offs. Because their platinum layer is so thin, they’re more fragile than thicker RTDs—you can’t bend them too sharply, and they’re less resistant to extreme vibration or high-pressure environments. They also have slightly lower accuracy than wire-wound RTDs, usually around ±0.15°C for Class A, compared to Class A wire-wound’s ±0.1°C. I often see engineers choose thin-film when they’re prototyping a new product, or when they need hundreds of sensors for a commercial build—they’re a reliable, low-barrier entry point without sacrificing too much performance.
Next up is Wire-Wound RTDs. These are the heavyweights of the RTD world, built for precision and durability. Instead of depositing platinum onto a surface, wire-wound RTDs use a very fine (typically 25 micrometers or thinner) pure platinum wire wound around a ceramic or glass core, then sealed in a protective sheath. This construction gives them a much thicker platinum element, which translates to three key benefits: higher accuracy, longer-term stability, and better resistance to mechanical stress and high temperatures. For applications where temperature control is non-negotiable—like semiconductor manufacturing, pharmaceutical sterilization processes, or aerospace testing—wire-wound RTDs are the go-to. Their accuracy can hit Class AA standards, which is ±0.05°C over their range, and they can reliably perform up to 850°C, some even up to 1000°C with special sheathing. That said, they do have a downside: they’re more expensive and bulkier than thin-film RTDs. The fine wire is more labor-intensive to wind, and the entire assembly requires robust protective packaging, so they’re not the right choice for high-volume, low-cost applications. As an RTD supplier, we often pair wire-wound RTDs with custom sheaths for industrial clients who run critical processes—for example, a food and beverage manufacturer might use them to monitor the pasteurization temperature of milk, where even a 0.2°C error could lead to unsafe products or spoiled batches.
Then there are Cabel RTDs (sometimes called bare-element RTDs), a specialty type that’s different from the fully assembled, sheathed RTDs most people use. Cabel RTDs are just the bare platinum wire wound around a core, with no outer protective coating or sheath, designed to be inserted directly into a well or process container. They’re ultra-compact, have extremely fast response times (sometimes as low as a few milliseconds), and can handle temperatures up to 1100°C when properly insulated. But they’re also the least durable of all RTD types—exposing them to moisture, chemicals, or physical impact will ruin them quickly. That makes cabel RTDs perfect for specialized high-temperature applications, like measuring the temperature inside a furnace, or as part of a custom assembly for a lab or industrial test rig where the sensor is fully protected within a built-in well. We only supply cabel RTDs to clients who have specific, controlled use cases where they don’t need standalone durability—usually aerospace research, high-temperature process testing, or custom OEM builds.
Beyond the construction of the sensing element, RTDs are also categorized by their resistance at 0°C, a standard that’s critical for compatibility with measurement electronics. The two most common resistance values are 100 ohm and 1000 ohm RTDs. Wait, you might be thinking—100 ohm at 0°C makes sense, why 1000? Let me explain. A 1000 ohm RTD has 10 times the resistance of a standard 100 ohm RTD, which means you get a much stronger electrical signal for the same temperature change. That reduces noise, especially in long cable runs—if you’re running a sensor 50 feet from a controller, a 1000 ohm RTD’s signal is far less likely to be distorted by cable resistance than a 100 ohm one. For that reason, 1000 ohm RTDs are increasingly popular in industrial automation, building management systems, and remote monitoring setups, where long distances between sensors and controllers are common. The 100 ohm RTD is still the industry standard for most general applications, though—they’re compatible with off-the-shelf measurement equipment, and their lower resistance means you can use smaller wire for connections, cutting costs. As an RTD supplier, we stock both 100 and 1000 ohm options, and I always ask clients to specify their measurement setup when we quote—because a 100 ohm RTD won’t work well if their controller is calibrated for 1000 ohm, and vice versa.
Another important distinction is the temperature range the RTD is designed for, which ties into both the metal used and the construction. Most standard platinum RTDs work from -200°C to 850°C, but for temperatures above 850°C, we use high-temperature RTDs, usually made with platinum-rhodium alloys instead of pure platinum. These alloys are more resistant to oxidation at high temperatures, so they can reliably measure up to 1600°C—perfect for applications like metal smelting, glass manufacturing, or kiln monitoring. On the low end, for cryogenic applications (temperatures below -200°C), standard platinum RTDs lose their linearity, so we offer cryogenic RTDs made with special metals like nickel or even doped germanium, which maintain accuracy at ultra-low temperatures, like testing liquid nitrogen or spacecraft components. I’ve worked with aerospace engineers who needed RTDs to monitor satellite components at -250°C, and those cryogenic RTDs were the only option that could deliver consistent, accurate readings in that extreme environment.
Now, a common question I get: are there RTD types for harsh environments? Absolutely, and that’s where our sheathed RTDs come in. We offer industrial-grade RTDs with stainless steel, Inconel, or Hastelloy sheaths, designed to resist corrosion, vibration, and physical impact. These are often called “industrial RTDs” or “probe RTDs” because they’re shaped into a probe for easy insertion into pipes, tanks, or process lines. They’re built to withstand 24/7 operation in factories, oil refineries, or chemical plants, where other sensors would fail. For example, a chemical processing plant might use a probe RTD with a Hastelloy sheath to monitor the temperature of corrosive acids, and that sensor will last years instead of months. We also offer waterproof RTDs for outdoor applications, like monitoring the temperature of water in irrigation systems or swimming pools, where moisture resistance is key.
I should also mention something that’s often overlooked: thin-film vs wire-wound RTDs’ response time. Response time is how quickly the sensor detects a temperature change. Thin-film RTDs have a faster response time, usually around 0.1 to 1 second, because their flat, thin substrate has a lower thermal mass—they heat up and cool down faster. Wire-wound RTDs, with their thicker ceramic core, have a slower response time, sometimes 2 to 5 seconds, making them better for steady-state temperature measurement, while thin-film is ideal for applications where temperatures change rapidly, like testing food cooking times or HVAC load changes. As an RTD supplier, we make sure to note response time in every product spec, because it’s a make-or-break feature for many clients.
Wait, let’s address a common misconception: people often mix up RTDs with thermistors, but they’re not the same, and that ties into types. Thermistors are also temperature sensors, but they use semiconductor materials, not pure metals, and their resistance curve is nonlinear, especially at higher temperatures. RTDs, especially platinum ones, have a linear resistance curve, which makes them much easier to calibrate and integrate into control systems—no complex mathematical adjustments needed. That’s why for most industrial and commercial uses, RTDs are preferred over thermistors for consistency.
So, how do you pick the right RTD type for your project? Let’s walk through a quick framework I use with every client: First, define your temperature range and accuracy needs. If you need ±0.1°C accuracy between -50°C and 500°C, wire-wound is your bet. If you need low cost for 100+ sensors in general HVAC, thin-film works. If you’re working above 850°C, go for a high-temperature platinum-rhodium RTD. Second, think about your environment. Is it dry, low-stress, high-volume? Thin-film. Is it corrosive, high-vibration, industrial? Sheathed probe RTD. Is it ultra-high temperature or cryogenic? Specialty element RTD. Third, check your measurement electronics. Are you using a controller calibrated for 100 ohm? Stick with 100. If you’re running long cable runs, 1000 ohm will give you a more stable signal.
At the end of the day, the right RTD isn’t just the most expensive one or the fanciest type—it’s the one that fits your exact use case. If you’re tired of sensors that fail prematurely, or your process is throwing off readings because you picked the wrong type, we have a range of RTDs for every need, from standard thin-film for prototyping to high-accuracy wire-wound for critical industrial processes. We work with OEMs, engineers, and facility managers to custom-spec RTDs when off-the-shelf options don’t quite fit, so you get a sensor that works for you, not against you.

If you’re ready to chat through your project, ask questions about specs, or request a sample to test, we’re here to help. Don’t hesitate to reach out to discuss your requirements.
High Temperature Thermocouple References
- Johnson, C. (2018). Temperature Measurement: Principles, Techniques, and Applications. Industrial Press.
- ASTM International. (2020). Standard Specification for Platinum Resistance Temperature Detectors (RTDs). ASTM E1120-20.
- Li, Y., & Wang, H. (2021). Recent Advances in Thin-Film RTD Sensors for Industrial Applications. Sensors Journal, 21(12), 4012.
- National Institute of Standards and Technology (NIST). (2019). Temperature Measurement Reference Guide: Resistance Temperature Detectors. NIST Special Publication 250-86.
Chongqing Haichen Instrument Co., Ltd.
Chongqing Haichen Instrument Co., Ltd. is one of the most professional rtd sensor manufacturers and suppliers in China for over 20 years, featured by good service and competitive price. Please rest assured to buy high quality rtd sensor for sale here from our factory. For customized service, contact us now.
Address: No.11 Gusheng Road, Caojie Street, Hechuan District, Chongqing City, P.R. China
E-mail: sales@hcsensor.com
WebSite: https://www.hcsensor.com/