Posted in

What are the vibration and shock resistance requirements of an Automated Storage and Retrieval System?

Hey everyone, I’m Jake, lead engineer and part of the sales team at an ASRS supplier that’s been knee-deep in designing and building automated storage and retrieval systems for warehouses, manufacturing plants, and even cold storage facilities for almost a decade. One question I get nonstop from potential clients—from startup warehouse managers to operations directors at Fortune 500s—isn’t about how fast our bots move or how much they hold. It’s something that sounds boring at first, but it’s the difference between a system that runs flawlessly for 10 years and one that breaks down every other month: vibration and shock resistance requirements for ASRS. Automated Storage and Retrieval System

Let’s be real—when you’re dropping big cash on an automated storage and retrieval system, you don’t want it to get sidelined because a forklift rams a wall 50 feet away, or because the conveyor belt next to it vibrates so hard the inventory starts shifting. I’ve seen it happen. A client in the automotive parts space installed a cheap ASRS a few years back, skipped the vibration testing, and within 6 months, their racking system developed micro-cracks that led to a partial collapse. They had to shut down operations for 2 weeks to fix it, costing them way more than the savings from going with the cheapest bid. That’s why today I’m breaking down exactly what ASRS vibration and shock resistance requirements actually are, why they matter for every single part of your system, and how our team builds them into every ASRS we deliver.

First, let’s get the basics straight—no overly technical jargon, I promise. Vibration is the constant, low-level shaking that comes from things like conveyor belts running 24/7, pumps, forklift traffic, or even heavy trucks driving past a warehouse. Shock is the sudden, sharp jolt—think a forklift hitting a dock plate, a pallet dropping on the floor, or a seismic event (yes, even mild earthquakes in non-quake zones can cause issues, I’ll get to that later). For ASRS, this isn’t just about the big metal racks; it’s every single component: the high-density racks, the storage and retrieval (S/R) machines that zoom up and down aisles, the conveyor systems that move pallets in and out, the controls, sensors, and even the inventory stored inside.

Let’s start with the racking system, because that’s the backbone of any ASRS. Most ASRS use either selective racking or very narrow aisle (VNA) racking, both of which have to handle way more dynamic load than regular static storage racks. The standard for vibration resistance here? We follow ISO 9001 and AS 4084, but we tailor it for each client’s space. For low-vibration environments—like a cold storage warehouse where the only vibration is from the refrigeration compressors—we test racking for continuous vibration at 1 to 100 Hz, with a peak acceleration of 0.1 g (gravity force, for reference, 1 g is what you feel when you hold a 1-pound weight). That’s overkill for some small warehouses, but for the big ones? Not even close. For mid-vibration spaces—like a manufacturing plant where overhead cranes run above the ASRS aisle—we bump that up to 0.25 g, and for heavy-vibration areas—like a distribution center where 50+ forklifts are moving all day? We go up to 0.5 g, and sometimes even higher, depending on nearby activity.

Shock requirements for racking are even more specific. We use ISO 14801 for testing, which simulates sudden jolts. For most standard ASRS, we test for 15 g shocks lasting 11 milliseconds—enough to handle a forklift hitting a nearby wall, or a pallet being dropped from 3 feet away. But wait, what if your warehouse is in a seismic zone? We recently built an ASRS for a client in southern California, and we had to up their shock resistance to 0.7 g for earthquakes up to 7.0 magnitude. That’s not something you can skimp on—local building codes in high-seismic areas mandate this, but even if you’re not in a code zone, skipping it can lead to disaster.

Next up: the S/R machines. These are the heroes of the ASRS, zooming up and down aisles at speeds up to 500 feet per minute, lifting pallets as heavy as 2,000 pounds. They’re built on tracks attached to the racking, so they’re constantly exposed to both vibration from the tracks and shock when they start/stop suddenly (we’re talking about 0.5 g to 1 g of acceleration when they take off or brake hard). For vibration, S/R machines need to be able to handle the same levels as the racking, but they have an extra layer: their internal components. The motors, drives, and control systems on S/R machines are sensitive to constant shaking—too much vibration and they’ll misalign, leading to missed picks or even crashes. That’s why we add vibration dampeners to the S/R machine’s base, and we test them for random vibration up to 200 Hz, which covers everything from track vibration to minor equipment movement. For shock, S/R machines need to handle up to 10 g of shock, because when they stop suddenly (like if a sensor detects a pallet out of place), that jolt is way higher than a forklift hitting a wall. We recently had a client test our S/R machine’s shock resistance on a shake table, and it survived a 12 g shock without a single glitch—talk about peace of mind.

Now, the conveyor systems that connect the ASRS to the rest of the warehouse—loading docks, order picking stations, packaging lines, all that stuff. These are often the most overlooked part of vibration and shock resistance. Conveyors are moving nonstop, 24/7, and if they vibrate too much, pallets will shift, sensors will fail, and even the conveyor belts themselves will wear out faster. For vibration, conveyors in an ASRS need to handle continuous vibration up to 0.3 g, but we also test them for resonant frequency—super important, because if a conveyor’s natural frequency matches the frequency of the vibration around it, it will start shaking violently, which can cause it to break apart. We use finite element analysis (FEA) software to calculate the resonant frequency of every conveyor we build, and we adjust the design to make sure it’s outside the range of common warehouse vibrations (which is 10 to 60 Hz). For shock, conveyors need to handle up to 8 g of shock, because when a pallet hits the end of a conveyor line, that sudden stop is a lot of force. We add shock-absorbing bumpers at the end of each conveyor section, and we test every conveyor before it leaves our shop to make sure it passes.

Wait, let’s talk about the tiny, easy-to-miss components—sensors, controls, and inventory. I can’t tell you how many times a client has asked, “Do I really need to test the small sensors?” Yes. Absolutely. The photoeyes that detect pallets, the proximity sensors that keep S/R machines from crashing, the PLC controls that run the whole system—all of these are sensitive to vibration and shock. For example, a proximity sensor that’s mounted on a vibrating racking will start giving false readings if the vibration is too high, leading to the S/R machine stopping mid-aisle, which shuts down the whole system for 10 to 15 minutes. For sensors and controls, we follow MIL-STD-810, which is the standard for military equipment (so you know it’s tough). Vibration testing for these is up to 0.5 g, and shock testing is up to 15 g, because they need to survive not just warehouse activity, but also shipping if the system is assembled off-site and transported. And inventory? If you’re storing fragile goods—like glass bottles, electronics, or pharmaceuticals—you might need extra vibration and shock resistance for the pallets themselves. We work with clients to add foam padding, weight distribution plates, and even vibration-dampening pallet supports to make sure their inventory isn’t damaged during transport inside the ASRS.

Now, why does all this matter for you? Let’s put numbers to it. I just mentioned that a client I worked with a few years ago skipped vibration testing for their ASRS, and it cost them 2 weeks of downtime. The cost of that downtime? $1.2 million, from lost orders and delayed shipments. Compare that to the $15,000 extra they would have spent on properly testing and designing the system for vibration and shock. That’s not even a fair fight. Another example: a cold storage client we built an ASRS for last year. Their refrigeration compressors cause constant low-level vibration, and if we hadn’t added the extra vibration dampeners to their S/R machines, they would have had to replace those machines every 3 years. Instead, they’ve had the system running for 18 months with zero issues, and the maintenance costs are way lower than they projected.

What factors affect the vibration and shock requirements for your specific ASRS? It’s not one-size-fits-all. First, your warehouse environment: are you in a high-seismic zone? Do you have heavy equipment running nearby? Is it a cold storage, manufacturing, or distribution space? Second, the type of inventory you’re storing: fragile electronics vs. heavy automotive parts vs. frozen food—all have different needs. Third, the size and speed of your ASRS: a small, 10-aisle system for a 10,000 square foot warehouse has different requirements than a 50-aisle system for a 1 million square foot distribution center. That’s why we don’t just send our clients a standard spec sheet—we send an engineer out to their site first, to survey nearby activities, note the warehouse structure, and talk about their inventory, then customize the vibration and shock requirements for their exact needs.

Wait, let’s clear up a common myth: some people think “more vibration resistance = better” and overdesign their system, which just adds unnecessary cost. That’s not true. Overdesigning would mean spending $50,000 on vibration dampeners for a small warehouse where the only vibration is from a occasional forklift. It’s about balance. Our team works with clients to find the sweet spot: enough vibration and shock resistance to handle their specific environment and needs, without wasting money on features they don’t need. For example, a small e-commerce warehouse with 2 aisles storing clothes might only need 0.15 g vibration resistance and 10 g shock resistance, while a large automotive parts warehouse with 10 aisles storing heavy engine parts needs 0.4 g vibration resistance and 18 g shock resistance. We run site surveys and computer simulations to nail that sweet spot every time.

Another thing we emphasize: ongoing testing and maintenance. It’s not enough to build a system that passes vibration and shock testing—you have to test it regularly, too. We recommend annual vibration checks, especially if you’ve added new equipment to the warehouse (like a new conveyor belt or overhead crane). We also provide clients with a maintenance checklist that includes checking racking for micro-cracks, tightening S/R machine bolts, and calibrating sensors to make sure vibration levels haven’t increased over time. I’ve seen a client’s ASRS start having issues after 3 years because they added a new forklift fleet without realizing it increased vibration levels—they caught it during our annual check, fixed it, and avoided 6 months of expensive downtime.

So, what should you do if you’re in the market for an ASRS? First, don’t skip the vibration and shock requirements. It’s not a trivial detail—it’s the foundation of a reliable system. Second, work with a supplier that doesn’t use a one-size-fits-all approach. Ask them about their site survey process, their testing standards, and how they customize vibration and shock requirements for your environment. If a supplier just sends you a generic spec sheet without coming to your warehouse to look around, run the other way (and no, I’m not being dramatic—this is one of the most common red flags in ASRS sales).

If you’re ready to talk about an ASRS for your operation and want to make sure it’s built to handle the vibration and shock in your space, reach out to our team. We’ll send an engineer out to your site, walk through your needs, and give you a clear breakdown of exactly what vibration and shock resistance requirements your specific system needs, no jargon, no hidden fees. We’ve built ASRS for everything from small e-commerce warehouses to large manufacturing plants, and we’ve got the testing and experience to make sure your system runs flawlessly for years.

Wait, before I wrap up, one last quick story. Early in my career, I was on a site visit for a client that had a brand-new ASRS that was already having S/R machine crashes. Turned out, the previous supplier had built the racking with resonant frequency that matched the frequency of the client’s new refrigeration system. The racking was vibrating so hard that the S/R machine’s tracks shifted, leading to the crashes. We fixed it by adjusting the racking design to shift the resonant frequency, added vibration dampeners, and the system has been running for 12 years without a single issue. That’s why this stuff matters—one small miscalculation and you’re paying for it for years.

At the end of the day, an ASRS is a big investment, and the last thing you want is for it to fail because you cut corners on vibration and shock resistance. Do it right the first time, and you’ll have a system that saves you time, money, and headaches for a decade or more.

If you’re looking for an ASRS supplier that actually gets vibration and shock requirements (I swear, we don’t just copy-paste specs), feel free to get in touch to start the conversation. We’re here to answer all your questions, no sales pitch pressure—just honest, practical advice built from 10 years of on-site experience.

Automated Guided Vehicle References:
ISO 9001:2015, Quality management systems — Requirements
ISO 14801:2007, Resilient floor coverings — Determination of resistance to shock
MIL-STD-810H, Environmental Engineering Considerations and Laboratory Tests
AS 4084:2012, Steel storage racks — Design, manufacture and installation
International Warehouse Logistics Association (IWLA) ASRS Performance Guidelines, 2021


Hefei Hagong Robot Co., Ltd.
With abundant experience, we are one of the most reliable automated storage and retrieval system manufacturers and suppliers in China. Please feel free to buy durable automated storage and retrieval system made in China here from our factory. Good service and quality products are available.
Address: Building C3, 2nd Floor, Intelligent Science Park, Economic and Technological Development Zone, Hefei City, Anhui Province
E-mail: hfhg2026@126.com
WebSite: https://www.hagongrobot.com/