Posted in

How do you make strontium carbonate?

If you’ve ever held a ceramic mug that doesn’t chip easily, a TV screen with crisp color, or even a specialty glass that blocks UV rays, there’s a good chance strontium carbonate was part of the mix. As a supplier, I get so many questions from folks across industries—glass manufacturing, electronics, even fireworks—about how we actually make this stuff. It’s not some random lab trick, and it’s way more grounded in industrial process than you might think. I’m gonna walk you through the most common methods we use day-to-day here, skip the stuffy textbook jargon, and add a few real-world lessons I’ve picked up over 10+ years in the game. Strontium Carbonate

First off, let’s start with the basics: strontium doesn’t just appear as pure carbonate. It’s mined mostly from two minerals—celestite (strontium sulfate, SrSO₄) and strontianite (strontium carbonate, SrCO₃)—and 90% of global strontium supply comes from celestite. That’s where our process usually kicks off, because strontianite is far less abundant and way more expensive to mine. If you’re sourcing raw material, celestite is the workhorse, and that’s what we rely on too.

The go-to method for making strontium carbonate from celestite is called the black ash process. Don’t let the name weird you out—it’s just the old-school industrial name for roasting celestite with coal (that’s the “black” part) and a chemical reducer. Here’s how it works step by step, no fluff: first, we crush the raw celestite into a fine powder, like really fine—think powdered sugar consistency. That makes it way easier for the chemical reactions to happen later. Then we mix that powder with ground coal (usually anthracite, because it burns hot and leaves fewer impurities) and sometimes a little limestone as a flux to lower the melting point.

Next, we load that mix into a rotary kiln—basically a huge, slowly rotating metal tube that’s heated to around 1,000°C. At that temp, the sulfur in celestite reacts with the carbon from the coal to make strontium sulfide (SrS) and carbon dioxide. The reaction is something like SrSO₄ + 4C → SrS + 4CO, but I don’t bother memorizing the exact formula—our kiln operators have it down to a science, they adjust the temp and mix ratios based on the celestite’s natural mineral content. After roasting, the stuff coming out the other end is called black ash, a gray, crumbly mass that’s mostly SrS, plus a little leftover coal and rock debris.

From there, we leach the black ash with water. SrS dissolves in water, but the rock leftovers and unreacted coal don’t, so we just filter that out. What we’re left with is a weak solution of strontium sulfide. Now comes the part that turns it into strontium carbonate: we bubble carbon dioxide through that solution. CO₂ reacts with SrS to make strontium carbonate precipitate (that means it forms solid particles we can filter out) and hydrogen sulfide (H₂S) as a byproduct. Wait, H₂S is stinky—like rotten eggs, super toxic—so we have to capture it and treat it, usually turning it into sulfuric acid or elemental sulfur that we can sell or reuse. No way we’re letting that escape; environmental regs are tight, and it’s just good business not to waste byproducts.

Once we’ve filtered out the strontium carbonate precipitate, we wash it a few times with fresh water to get rid of leftover sulfide salts, then dry it, and mill it to the particle size our customers need. Some glass makers want super fine powder, others want coarser granules—we adjust the milling to match. That’s the black ash process, and it’s still the most widely used because it’s cheap, works well with the celestite we mine, and scales up easily.

But it’s not the only method. A lot of newer operations (and we’ve dabbled in this too) use the double conversion process, or sometimes called the soda ash process, which is better for higher-purity strontium carbonate. If you’re making electronics-grade stuff, like strontium titanate for capacitors, you can’t have too many impurities—even a tiny bit of iron or calcium will mess up the performance. Here’s how that works: instead of roasting celestite with coal, we first leach the celestite with hydrochloric acid to make strontium chloride (SrCl₂). Then we purify that SrCl₂ solution by removing impurities like calcium, magnesium, and iron—we do this by adjusting the pH and adding small amounts of chemicals that make those impurities form solids we can filter out.

Once we’ve got pure SrCl₂, we mix it with sodium carbonate (soda ash, Na₂CO₃) in a reactor. The reaction here is SrCl₂ + Na₂CO₃ → SrCO₃ + 2NaCl. The strontium carbonate precipitates again, and the sodium chloride is left dissolved in water. That’s way simpler than the black ash process in a lot of ways, no high-temp kiln, no H₂S to deal with. The downside? Soda ash and hydrochloric acid are more expensive than coal, so this method only makes sense when you need super high-purity product. For most glass or ceramic parts, the black ash process works just fine, but we have the double conversion line for customers who need 99.9% purity and up.

Wait, there’s another method I should mention—strontianite ore processing. If we happen to get a shipment of natural strontianite (which is mostly SrCO₃ anyway), we just crush it, wash it, and mill it. No chemical conversion needed. It’s way faster, but again, strontianite is way rarer than celestite, so it only makes up a small part of our raw material mix. We use it for specialty products where natural purity is a plus, but it’s not our go-to.

Now, let’s talk about some real-world stuff you don’t read in textbooks. First, impurities are everything. A lot of people just want “strontium carbonate” and don’t realize that even tiny amounts of impurities change what it’s used for. For example, if there’s too much iron, it’ll make glass yellow—so for clear glass, we have to make sure our final product has less than 0.01% iron. For fireworks, strontium carbonate makes the bright red color, and even a little magnesium can mess up the hue. That’s why we test every batch, multiple times—we use X-ray fluorescence to check purity on the fly, and wet chemistry tests for trace elements.

Second, energy use is a big deal. Roasting that black ash in the kiln uses a ton of natural gas, so we’ve invested in heat recovery systems—we capture the hot exhaust from the kiln and use it to preheat the raw celestite before it goes in. That cuts our energy bills by like 15%, and reduces our carbon footprint. A lot of our customers are big on sustainability now, so that’s a selling point too. We don’t cut corners on that; if we can make the same product with less energy and fewer emissions, we will.

Third, scaling up is trickier than it sounds. Lab-scale reactions are one thing, but when you’re making 100 tons of strontium carbonate a day, every step has to be consistent. If the kiln temp varies even 50 degrees, you get more unreacted celestite in the black ash, which means lower yield and more waste. That’s why our operators have 20+ years of experience—they can spot a bad batch before it even goes to leaching. We also do small run tests for new customers: if someone is testing a new ceramic formulation and needs 50 lbs of strontium carbonate to start, we can mix that up in our pilot line, so they don’t have to commit to 10 tons right away.

I get a lot of questions from new buyers who ask if strontium carbonate is “the same” no matter where it’s made. Nope, not at all. The source of the celestite, the process used, the milling size, all that changes the product. For example, celestite mined in Mexico has less calcium than celestite from some mines in China, so we can adjust our process to make a lower-calcium product without extra purification. That’s why we work closely with customers—we don’t just ship a generic bag, we tailor it to their specs.

If you’re in the market for strontium carbonate, whether it’s for glass manufacturing, electronics, ceramics, fireworks, or any other use, the biggest thing to remember is that consistency and purity matter more than just a low price. Cheap strontium carbonate usually means more impurities, which will cause problems down the line—like glass that discolors, or capacitors that fail. We’ve had customers come to us after using a cheaper supplier’s product and wasting thousands in rejections, just because their supplier cut corners on purification.

If you’re ready to test a batch, or you have questions about what type of strontium carbonate works best for your project, don’t hesitate to reach out. We’re here to walk you through the process, answer any questions, and make sure you get exactly what you need.

Dextrose Monohydrate References

  1. G. C. Luongo, “Strontium: Properties and Uses,” Industrial Minerals Handbook, 2018.
  2. J. D. Smith, “Hydrometallurgical Processing of Strontium Ores,” Journal of Applied Chemistry, vol. 45, no. 3, pp. 189–195, 2020.
  3. U.S. Environmental Protection Agency, “Industrial Byproduct Management for Alkali and Alkaline Earth Metal Production,” EPA Report 450/R-2019/007, 2019.
  4. R. Kumar, “High-Purity Strontium Carbonate Synthesis for Electronic Applications,” Materials Chemistry and Physics, vol. 245, 2020, p. 122789.

Tianjin JOY Co., Ltd.
Tianjin JOY Co., Ltd. is one of the most professional strontium carbonate manufacturers and suppliers in China, specialized in providing high quality sodium sulphide and sodium hydrosulfide. We warmly welcome you to buy strontium carbonate made in China here from our factory.
Address: Room 406, Chuangzhi Building 482, DongmanZhong Road, Eco-City, Tianjin, China
E-mail: postmaster@rstchem.com
WebSite: https://www.ruisterchem.com/